I administer a group on Flickr called “Star Trails” and moderate a group called “Best of Star Trails“. The good news is there is a constant source of new exciting photography there… and a fair number of beginners facing some common problems. Some of the problems are due to limitations in the camera, and some are due to the selection of exposure time, ISO, f-stop or focus. Some are due to cockpit errors of the kind I described in my August 13th article: Many Paths to Failure regarding unattended shooting with an intervalometer. This list is in addition to those problems and in a way is a bit more fundamental.
Common problems are:
- Poor Focus
- Dim Stars (low contrast)
- Strange Colors
- Purple or Pink Glow
- Gaps in Star Trails – see part 2.
- Lots of Noise (Colored Speckles) – see part 2.
Let’s tackle those one at a time.
Focus is Poor
Poor focus is a topic unto itself which I covered in My Camera Can Not Focus in the Dark – And Neither Can I! But there are a few other causes besides having an incorrect focus. Additional problems that may create noticeable lack of sharpness:
- An unsteady tripod (often noticeable when there is wind). And it may not just be the tripod. Check the quick mount plate and the tension on the knobs.
- Condensation (that is dew) on the lens. Use a lens hood (helps), and if really bad a lens heater.
Stars Are Not Very Bright
Often the lack of stars is due to an unnecessarily small aperture. Selecting a smaller aperture can help with your image, too. Here are some examples. First is an example from Miguel Leiva:
In Photo 1 a small aperture allows greater depth of field so that focus is sharp from the foreground to infinity but that small aperture also diminishes the contrast in the stars. Taken to an extreme a high f-stop (tiny aperture) with stars can produce an effect like that in Photo 2 by Vincent Miu which was a runner up in the 2009 Astronomy Photographer of the Year contest. The very small aperture, f/20, eliminates all but the brightest elements from the night sky.
While a tiny aperture reduces the number of stars captured, a large aperture (small f-stop number) and/or a high ISO results in many more visible stars especially when the sky is dark. Compare these shots:
Photo 3 was shot at f/3.5 ISO 640, while Photo 4 was f/4, ISO 100. Both include about the the same star field but many more stars are present in the higher ISO shot. Even if you are not trying to reduce the number of stars in the field, you might be forced to use a smaller aperture to get more depth of field. Another common problem that causes reduction in contrast is sky glow. When the sky itself begins to lighten you can be sure that the stars will not contrast well. The best way to control this is to take shorter exposures and later at night – or on a clearer night (cold winter nights produce the clearest skies). The moon is also a huge source of glow. Treat the glowing moon just as you do artificial light glow – reduce your exposure length (and ISO) to take pictures when the moon is strong. But do not give up just because you can barely make out stars in your night sky – the camera can see them better than you can! Photo 6 is a perfect example. The city glow made it impossible to see more than 8 or 9 stars toward the north and yet the star trails are quite present.
Colors are Strange
Many people are surprised to see that the stars in their photos are different colors: red, orange, yellow, blue and white. Those are the natural colors of the stars. People are also surprised to see a blue sky however even modest amounts of moonlight or a very long enough exposure will result in blue sky! Unfortunately sometimes the stars or the sky are unnaturally colored. Usually the culprit is one or more of these factors:
- Incorrect white balance setting (I recommend “Daylight”)
- The presence of artificial light.
Sometimes when handed lemons you can make lemonade as in Photo 6. I could not correct for the predominate sodium vapor lights so instead of fighting I adjusted the color temperature to make the foreground elements look as natural as I could and did not worry that the stars became white – most people think of them as white anyway. It certainly helps that the image also includes a portion of twilight illumination to help keep the scene realistic looking.And there is yet one more way to solve the color problem; but you will have to do some editing. To fix different color lights you can color balance each element separately and then combine the elements into one image. For example using “Daylight” white balance for the star trails and “Tungsten” for the street scene may produce a natural and pleasing looking photograph. Photo 6, above was manipulated in a similar way. Once it became completely dark the glow from the city lights caused flaring and ghosting. The solution was to choose one properly exposed frame from twilight and layer that on top. Layering like this is easier if you have an overexposed daylight shot that you can use as a mask. More on that in the Night Photography Workshop
There is Pink or Purple at the Edges
Some cameras, particularly older models may suffer from “amp noise”. The glow or noise is usually visible at the corners or edges of the photograph and usually only with longish exposures (over 8 minutes). Here is an example from Ethan Doerr of what “amp noise” may look like.
If your camera is subject to amp glow there are some tactics you can try. The simplest is to keep your exposures short and stack them. Or perhaps allow the camera to cool down from time to time. Or only shoot in Antarctica ;-).
For more Trouble with Long Exposures see Part 2.